For a garment and RMG exporter in Bangladesh, the container is where the order meets the vessel. The cartons are packed, the buyer booking is confirmed, and the shipment must reach Chittagong Port in time. A container that arrives late, leaks, or does not close properly can put the whole shipment at risk, even when the garments themselves are ready.
This guide explains reliable freight container rental for garment and RMG exporters: why reliability matters, what to look for in a container, which size and type suits garment cargo, the hiring steps, factory delivery, documents, inspection, port procedures, and cost factors. No fixed prices are listed here. A rate is confirmed at booking, depending on size, type, condition, duration, delivery location and availability.
Why Garment and RMG Exporters Need Reliable Freight Containers
Garment exports run on buyer deadlines. An order is cut, sewn, checked, packed in cartons, and loaded for a vessel that sails on a set date. The container must be ready when the factory is ready, and it must protect the cartons from rain, dust and damage on the road to the port and on the sea journey that follows.
Garment cartons are light for their size. Shirts, trousers, knitwear and woven garments fill the space inside a container before they reach the weight limit, so the internal height, door height, and usable floor space matter as much as the length. A container that is damp inside, has a damaged floor, or has doors that do not seal can damage cartons that took weeks to produce.
What Makes a Container Rental Reliable
A reliable rental starts with the container itself. The unit should be clean and dry inside, with no water marks, strong smell, or residue from a previous cargo. The doors should open and close smoothly, the locking rods and handles should work, and the seals should fit. The roof and walls should have no holes, dents or rust, and the floor should be sound, with no broken boards or soft spots.
A reliable rental also means clear terms. Before you agree, the size and type, hire period, delivery address and date, charge, delivery charge, deposit, and payment terms should be written down, with what is included and what is not.
20ft vs 40ft and Standard vs High Cube for Garment Cargo
Most garment exporters use 20ft or 40ft containers. A 20ft container is about 6 metres long, and a 40ft container is about 12 metres long. The width is generally the same for both, at around 2.4 metres. A 20ft unit is compact and easier to place in a smaller factory yard. A 40ft unit holds roughly twice the volume in general terms, suiting a larger volume of cartons in one unit.
A standard dry container is the most common type: a closed steel box for general dry cargo such as packed garments, cartons and textiles. Its outside height is generally around 2.6 metres. A high cube container is taller, generally around 2.9 metres high on the outside, with the same length and width. That extra height, about 0.3 metres or roughly one foot, gives more internal volume across the full length and width.
For garment cargo, the high cube is often worth checking. Cartons of shirts, trousers and knitwear are light and stack well, so the extra height lets you load more cartons in one container. A high cube also has taller doors, which makes it easier to load tall items.
A high cube is not right for every load. Heavy, dense cargo reaches the weight limit before the extra height is used, so a standard container may be fairer. If the factory gate, warehouse roof, or road has low clearance, a taller unit may not fit, so measure the tightest clearance point before you confirm.
| Feature | 20ft standard | 40ft standard | 40ft high cube |
|---|---|---|---|
| Length | About 20 feet, around 6 metres | About 40 feet, around 12 metres | About 40 feet, around 12 metres |
| Width | Around 2.4 metres | Around 2.4 metres | Around 2.4 metres |
| Outside height | Around 2.6 metres | Around 2.6 metres | Around 2.9 metres |
| Volume | Smaller, roughly half of a 40ft | Larger, roughly double a 20ft | Largest of the three, extra height |
| Best for | Smaller orders, tight factory yards, heavy cargo | Larger garment orders in one unit | Light, bulky garment cartons that need height |
| Door height | Standard door height | Standard door height | Taller doors, easier to load tall cartons |
| Site check | Standard height clearance needed | Needs a longer approach and more space | Check gate, roof, wires and warehouse height |
Do not choose by length alone. Count the cartons first, note their size and weight, and work out how high they can be stacked safely. Confirm the exact internal size of the unit offered, as the data plate is the reference.
How to Hire a Freight Container for Garment Export, Step by Step
Hiring a freight container for a garment export follows a clear sequence. Use the same steps for every order.
Step 1: Write down your requirement. Note the buyer order, the cargo and carton count, the rough volume and weight, the size and type you need, the factory address, the date you need the container, and how long you need it.
Step 2: Enquire and check availability. Share your requirement and ask whether the size and type are available for your date. Availability changes with shipping demand, so enquire early. Ask where the container is now and when it can be delivered to your factory.
Step 3: Ask for a written quotation. Ask for the size and type, the hire period, the charge, the delivery charge, the deposit and the payment terms, and what is included and what is not included. A rate is confirmed at booking, depending on size, type, condition, duration, delivery location and availability, so ask for it in writing.
Step 4: Confirm and book. Once you agree on size, type, duration, delivery date, address and a contact person, confirm the booking. Make sure someone at the factory will be there to receive the container.
Step 5: Inspect on delivery. Check the doors, seals, roof, walls and floor before you sign, as explained in the inspection section below. Take photos inside and outside, note the container number, and raise any problem at once.
Step 6: Load carefully at the factory. Put heavier cartons at the bottom and lighter cartons on top, distribute the weight evenly, and secure the load so it does not move. Count the cartons as you load them and keep a packing list.
Step 7: Seal and send to the port. Once loading is complete, close the doors, fit the seal, and note the seal number. The loaded container is then sent to Chittagong Port for the vessel.
Step 8: Return as agreed. After the container is handed over at the port, confirm in writing that the hire is closed.

Factory Delivery in Dhaka, Gazipur and Narayanganj
Most RMG factories are in Dhaka, Gazipur, Narayanganj and nearby industrial areas. Delivery to a factory needs more care than delivery near the port, because the roads are busier and the sites are tighter.
First, check the road. A truck carrying a container needs a road wide enough for the truck, with enough height clearance under any bridge, flyover, sign or overhead wire on the route. Share the full factory address, not only the area, and ask the driver or the supplier to confirm the route. A narrow lane, a sharp turn, or a low overhead cable can stop a delivery.
Second, check the gate. Measure the gate height and width, and the height of any roof or canopy over the entrance. A gate that fits a standard container may not fit a high cube, and if the gate is too low the cartons may need to be carried in by hand.
Third, check the placement area and the loading point. A 40ft container needs a longer approach and more space to set down than a 20ft container. The ground should be firm, level and dry, with enough space for the truck to turn and the doors to open fully. If cartons will be loaded inside a warehouse, check the internal height and door height as well.
Fourth, plan the loading time. Have the packing line and checking staff ready when the container arrives, allow extra time for Dhaka traffic to the port, and share the receiver’s contact details.
Documents to Keep Ready
Keep the basic documents ready so the export does not stop. For a business hire, keep a copy of your trade licence or business registration, the factory address in full, and the contact details of the person receiving the container.
For an export order, keep the commercial invoice, packing list and shipping documents for your buyer and vessel booking ready. The packing list should match the cartons as they are loaded. Keep a hire note with the size, type, period, delivery date and location, plus the container and seal number once the container is sealed.
If customs clearance is involved, your clearing and forwarding agent normally handles it, so share the container details with your agent in good time, including the container number, size and type, vessel and cut-off time.
Inspection Checklist Before You Load Garment Cartons
Check these points on delivery, and note anything wrong before you sign. First, the doors: open and close them, check the locking rods, handles and seals, and look for gaps. They should open and close smoothly.
Second, the roof and walls: look for holes, dents, rust and daylight coming through. A hole in the roof will let rain in and damage garment cartons.
Third, the floor: check for broken boards, soft spots, stains and a strong smell. The floor must be dry and sound, because cartons sit directly on it.
Fourth, the inside: check for water marks, previous cargo residue and any sign of contamination. A container for garments should be clean and dry inside, with no dust, oil or chemical smell. Note the container number, take photos inside and outside, and raise any problem at once. If the unit is not suitable, ask for a replacement unit before loading begins.
When loading, put heavier cartons at the bottom and lighter cartons on top, distribute the weight evenly, and secure the load so it does not move. Count the cartons as you load them, keep a packing list, and check the count against the buyer order. For tall cartons, use straps or bracing so they cannot fall during transport.

Chittagong Port Procedures and Customs
Chittagong Port is the main seaport for Bangladesh’s import and export cargo, and most garment exports pass through it. For an export, the empty container is taken from the depot to your factory, loaded, sealed and sent to the port for the vessel. Confirm the cut-off time with your agent and plan transport so you do not miss it. A container that misses its vessel may need a new booking.
Customs and port charges are separate from the hire cost in most cases, so ask which charges are included and which you will pay separately. Your clearing and forwarding agent normally handles customs clearance, and the shipping line handles the vessel booking, so keep both informed about the container number, size and type, and dates.
What Affects the Hire Cost?
No fixed price is given here, because the hire cost depends on several factors. Size matters: a 40ft container normally costs more than a 20ft container. Type matters: a high cube or a reefer normally costs more than a standard dry container of the same size.
Duration matters: a short hire for a few days or weeks is priced differently from a longer hire for several months. Condition matters: a container in good, clean and inspected condition is worth more than a unit with damage or wear. Delivery location matters: delivery to a factory in Dhaka, Gazipur or Narayanganj differs from delivery near Chittagong Port, because of the distance, the road and the time.
Always compare the total cost, including delivery and any deposit, and confirm it in writing before you book. A rate is confirmed at booking. Do not compare two quotations unless they cover the same size, type, period and delivery location. A low initial figure may exclude delivery, port handling or inland transport, so ask what is included before you decide.
Common Mistakes to Avoid
The most common mistake is booking the wrong size or type. A container that is too small means a second container and a second delivery. A container too large for your factory gate means a delivery that cannot reach the loading point. Measure the cargo and the site before you confirm.
The second mistake is booking too late. Container availability changes with shipping demand, and a specific size or type may not be available at short notice. Enquire early, especially for a high cube.
The third mistake is loading without inspection. A container with a leaking roof, a damaged floor or doors that do not seal can damage garment cartons. Inspect on delivery and raise any problem at once. The fourth mistake is missing the vessel cut-off. Confirm the cut-off time with your agent and plan backwards from it.
The fifth mistake is keeping a container beyond the agreed period without notice, because extra days are normally charged. Inform the supplier before the period ends and ask for an extension in writing. The sixth mistake is comparing quotations that cover different things. Compare the total cost for the same size, type, period and delivery.

Frequently Asked Questions (FAQs)
1. What is a freight container rental for garment exporters?
It is the hire of a shipping container for loading garment cartons at a factory and sending the loaded unit to Chittagong Port for export.
2. Which size suits garment cartons, 20ft or 40ft?
A 20ft suits smaller orders and tight factory yards; a 40ft suits larger buyer orders in one unit.
3. What is a high cube container, and is it good for garments?
A high cube is taller than a standard container, generally around 2.9 metres high against around 2.6 metres. It suits light, bulky garment cartons that need height.
4. How do I choose between a standard and a high cube container?
Measure the cartons and the factory gate and warehouse height first. A high cube suits tall, light cartons; a standard container may suit heavy, dense cargo or a low gate.
5. When should I book a container for a garment order?
Enquire as early as you can, once the buyer booking and the packing date are known, especially for a high cube or a busy sailing week.
6. What documents do I need to hire a container for export?
Keep your trade licence, factory address, contact details, commercial invoice, packing list and buyer booking ready.
7. How do I check a container before loading garment cartons?
Check the doors, seals, roof, walls and floor, look for leaks, damp and damage, and take photos inside and outside before you sign.
8. What happens if the container is damaged or damp on delivery?
Raise it at once, do not load garment cartons into it, and ask for a replacement unit. Keep your photos as a record.
9. Can a container be delivered to a factory in Dhaka, Gazipur or Narayanganj?
Yes, delivery by road is normally possible. Confirm the cost and timing for your full factory address first.
10. What is the vessel cut-off time?
It is the latest time a loaded container can reach the port for a specific vessel. Confirm it with your agent and plan backwards from it.
11. Can I use a hired container for storage at my factory?
Yes, a hired container can be used for storage if that is agreed in the hire terms. Place it on a firm, level surface and check the doors and locks.
12. What affects the hire cost of a freight container?
Size, type, condition, duration, delivery location and availability. A rate is confirmed at booking.
13. Is there a deposit for hiring a freight container?
It depends on the terms. Ask about any deposit, when it is paid, and how it is settled before you book.
14. What happens if I keep the container longer than agreed?
Inform the supplier before the period ends and ask for an extension in writing. Extra days are normally charged, so confirm the charge in advance.
15. How do I arrange freight container rental with Total Import Solution?
Contact Total Import Solution by WhatsApp or email with your size, type, cargo, factory location, dates and hire duration.
Total Import Solution — Contact Us
Total Import Solution, since 2016, provides sourcing and import support for businesses in Bangladesh, including reliable freight container rental for garment and RMG exporters, connected to shipments through Chittagong Port. For availability and a rate for your requirement, contact us:
- WhatsApp: +8801977954302
- Email: info@totalimportsolution.com
- Website: totalimportsolution.com